UV/LED Crystal Clear Nail Builder Gel, 15 ml
Transparent, single-phase gel for nail modeling with high self-leveling properties, medium density. It has good adhesion properties. It can be used both for modeling and as a base for color and camouflage gels, also for applying patterns and images, suitable for aquarium design. Does not peel or turn yellow. Polymerization time: 2 minutes in a UV lamp, 60 seconds in an LED lamp.
Instructions for applying PNB builder gel to nails:
- Disinfect your hands with a suitable product. Push back your cuticles, gently smooth the nail plate with a 180/240 grit file. Remove excess dust and apply Nail Dehydrator.
- Depending on the condition of the nail plate, apply an acid primer or an acid-free Bond Control primer. Use an acid primer for nails prone to oiliness, while an acid-free primer is suitable for normal nails. Apply a small amount of the acid primer, avoiding contact with the skin. Wait for it to evaporate completely, leaving the nail matte.
- As a base coat, use UV/LED Builder Gel Crystal Clear or Crystal Pink of your choice. Apply a thin layer using rubbing motions. Cure in an LED lamp for 30-60 seconds.
- Use a nail extension form, placing it against the free edge, and shape the nail with the gel of your choice.
- Remove any remaining gel with Gel Cleanser.
- Cut the nails into the desired shape using a 180/240 grit file.
- Apply a UV/LED Top coat to add shine and protect the nail from chipping and scratching. Cure in the lamp for 60 seconds.
If your nails are problematic or weakened, we recommend using the Bio Base PNB hybrid base coat. Apply a very thin layer of the product to the previously prepared nail, rubbing gently. Cure in the lamp for 30 seconds.
Comment